TV Fool  

Go Back   TV Fool > Over The Air Services > Help With Reception


Thread Tools
Old 16-Apr-2018, 12:02 PM   #1
Join Date: May 2010
Posts: 55
UHF director element


One half of one pair of UHF director elements on my UHF/VHF combination ota rooftop antenna (Winegard HD7698p) broke off (large bird? wind?)

from this:
->- ->-
->- ->-

to this:
->- ->-

Should I try to connect the element or would it be better to remove the other half?
Doesn't seem to affect reception much the way it is now.
And of course Winegard doesn't sell parts.

Last edited by olimazi; 16-Apr-2018 at 12:13 PM.
olimazi is offline   Reply With Quote
Old 16-Apr-2018, 12:44 PM   #2
Senior Member
Join Date: Sep 2016
Posts: 244
I would try to fix it if it were me. I've fixed broken elements before using just the right diameter threaded rod so that it is a snug, screw-in fit to the ID of the broken element. Use a 4-6 inch section of threaded rod and screw it half way into the remaining director stub and then screw the broken off piece onto threaded rod. The aluminum is soft enough for the threads to bite and hold--- it seemed to work fine for me. I used stainless steel for corrosion resistance. I think it is electrically conductive enough to not make a difference vs. the original continuous aluminum rod. Maybe some of that anti corrosion stuff you put on battery terminals would be a good idea too, I'm not sure.

Last edited by jrgagne99; 16-Apr-2018 at 8:22 PM.
jrgagne99 is offline   Reply With Quote


Go Back   TV Fool > Over The Air Services > Help With Reception

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT. The time now is 9:27 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright © TV Fool, LLC