Thanks for the info.
-So on the chart (signal power) is represented by NM and (noise power) is represented by Pwr, thus SNR?
-Do I subtract one from the other to get the net signal?
-The goal is to have a net of zero or above( plus number) or the other way around?
-Is the "some additional margin by recommending designing to an NM of +10already ." reflected on the charts
It might be more clear to me if you were able to provide a numerical example. i.e
Goal number = Current signal (NM), +- atenna gain, +-cable loss, +-spliter+-, amp or a link that already has this example.
The Terk would be nice but I have 4 tvs that i need to route the signal to.
Thanks again!
|