View Single Post
Old 29-Mar-2015, 10:55 PM   #5
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,747
ADTech:

Thanks for posting your test results, and adding your observations to help us understand the results. I always wondered what the noise floor would look like when damaged by spurious signals from IMD, but a SA wasn't in my budget.

The closest I could get was using my Sadelco DisplayMax 800 in the single channel scanning mode to approximate what a SA does to scan a channel with a signal and its adjacent unused channel to measure SNR.

Best regards,
rabbit
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 29-Mar-2015 at 11:04 PM.
rabbit73 is offline   Reply With Quote