View Single Post
Old 4-Oct-2010, 2:43 AM   #12
No static at all
Senior Member
 
No static at all's Avatar
 
Join Date: Apr 2010
Location: Chantilly, VA
Posts: 547
Did you try lowering the antenna a few inches as well ? I would try that before going higher, especially if only one channel is problematic. Does the signal level bounce around a lot when on channel 7?

Try to stay at least a foot from the metal cap on the chimney. The cap can have an affect at less than a foot, especially on VHF.

Also, do you have a sound bar or amplified speakers connected to the TV? I have seen them have an affect on VHF channels as well.
No static at all is offline   Reply With Quote