View Single Post
Old 21-Mar-2019, 4:41 PM   #7
Antennas Direct Tech Supp
Join Date: Jan 2010
Posts: 2,933
See post #2, I described where I drill them. A hole in each of the corners of the bottom of the housing that are closest to the F-connector. Do not drill in the corners directly under the driven element.

You can do this "in the air", if you choose, but you might get wet!

If you need a photo, let me know and I'll post one up here.
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at

Sorry, I'm not a mod and cannot assist with your site registration.
ADTech is offline   Reply With Quote