Thread: No Signal
View Single Post
Old 12-Jun-2017, 2:58 AM   #12
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,748
Quote:
DUMB QUESTION: What analogue signals?
Not a dumb question; it's an intelligent question.

You need a signal source to test your TV tuner. You don't have any digital signals to test the tuner.

Your tuner will receive analog and digital signals.

Most VCRs will put out an RF analog signal when playing a tape.

There are usually two RF coax connectors on a VCR. One connector is for RF IN for antenna or cable.

The other RF connector is for RF OUT that goes to the TV tuner at the antenna IN connector of the TV.

The VCR acts like a little TV transmitter, and can usually be set to send an analog TV signal on channel 3 or 4.

OK?
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html
rabbit73 is offline   Reply With Quote