View Single Post
Old 28-Sep-2013, 9:31 PM   #2
Posts: n/a
Most of the Digital Broadecast Tv stations/channels are Very Weak Signal Strength.

A Simple reception situation that requires a Big antenna installed above the roof in such a manner that the roof and building are not , obstructing , impeding , blocking , reception in the directions of , North West , North , North East.

Install a Winegard Hd7084P All channel antenna aimed at about 340 degree magnetic compass direction.

Here is how to aim antennas ,

Use a Real and Actual magnetic compass to aim antenna.


Install a Winegard , LNA-100 'Boost' amplifier.


For 1 Tv connected use No splitter.

For 2 Tv's connected use a simple common 2 way splitter.

For 3 Tv's connected use a simple common 3 way splitter.


Here are csome places to buy antennas and etc. .


Here are some above the roof antenna mounts.
Use the , ronard(911) , 5 foot tripod antenna mount.
Use the , ronard(4560) , eave antenna mount.
Measure around the chimney and use a , ronard(2212) , ronard(2218) , ronard(2224).

Buy the ronard antenna mounts at , , by typing , ronard (x) , in the solidsignal search box or buy from


As always , trees and tree leaves , plants and plant leaves , have a Negative effect on OTA=Over The Air , Broadcast Tv Reception , and so do buildings and other obstructions including your own roof and building.

The Best Practice is to install the HD7084P antenna at a locatuion that has the least amount to no amount of obstructions of any type or kind in the directions of reception.


Digital Tuners can develop - Digital Glitches - that are not cleared out with simple channel scans.

Do Double Rescan ,

Some digital tuners will Automatic channel scan for cable tv channels.

DO NOT channel sacan for cable tv channels.

Go into the Tv Setup Menu and select 'Air Channels' ~ 'Antenna Channels'.

Scan for Digital channels.
  Reply With Quote