View Single Post
Old 26-Sep-2020, 11:01 PM   #62
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,676
Review of Toner 0-20 dB Variable Attenuator

I ordered two of the Toner attenuators in case one was defective. One of them had a coax connector with insulation that hadn't been completely removed, making it difficult to insert the center conductor of the RG6 coax.





I removed the excess insulation with a drill bit held in my hand; the coax was then able to be properly inserted.

I still haven't figured out why they would paste the label on upside down.



It's important to check the female coax connectors to see if they make good contact with the center conductor of the coax:







Attached Images
File Type: jpg Toner Attenuator Connector OK.jpg (195.0 KB, 264 views)
File Type: jpg Toner Attenuator Connector NG.jpg (220.2 KB, 266 views)
File Type: jpg Toner Attenuator Label Inverted.jpg (183.5 KB, 265 views)
File Type: jpg Testing Coax Connectors.jpg (115.0 KB, 271 views)
File Type: jpg TestingCoaxTip3_1.jpg (93.7 KB, 258 views)
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 26-Sep-2020 at 11:44 PM.
rabbit73 is offline   Reply With Quote