Thread: Rca ant751
View Single Post
Old 20-May-2017, 7:30 PM   #42
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,286
The tests that I have made so far tell how well the antennas work indoors with my signals, but I have been searching for a test method that would give a more accurate indication of relative antenna gain.

I have settled on an Antennas Direct DB2E antenna and a Blonder Tongue HAVM-1UA Frequency Agile Modulator for a stable transmitted test signal.

I read about the antenna test measurements done by Kent Britain (WA5VJB). He has made measurements with the test antennas at ground level and above ground level. When the antennas are elevated, the receiving antenna picks up the direct signal and a signal reflected from the ground. I tried it both ways. The ground level signals level are much weaker, but the gain difference between antennas is about the same, so I used elevated antenna measurements. Kent was making measurements at microwave frequencies with horn antennas, see p. 5:
http://www.wa5vjb.com/references/Ant...0Notes-keb.pdf





First I did a comparison between the antennas elevated on tables and on the floor. The HAVM is only for UHF:

Code:
Comparison between antennas on tables and antennas 
on the floor for gain comparison measurements.

                 TABLES                  FLOOR

Channel    GE PRO    GE Attic     GE PRO    GE Attic
            29884     34792        29884     34792
            dBmV      dBmV         dBmV      dBmV

15         -11.1     -13.4        -20.3      -22.3
28         -10.0      -9.8        -24.9      -23.4
39         -12.1     -12.7        -23.5      -24.2
Attached Images
File Type: jpg DB2EandHAVM.jpg (171.0 KB, 1627 views)
File Type: jpg RCAANT7511rcvHAVM.jpg (147.0 KB, 1670 views)
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 20-May-2017 at 8:14 PM.
rabbit73 is offline   Reply With Quote