View Single Post
Old 19-May-2016, 1:15 PM   #4
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,747
Usually better to connect to the house electrical system ground. For a temporary test I use a wire connected to the grounding pin of 3-wire plug inserted in a properly wired 3-wire receptacle or a cold water pipe with no plastic sections in it.

You might have to move your antenna if it is close to the noise source.
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 19-May-2016 at 1:18 PM.
rabbit73 is offline   Reply With Quote