View Single Post
Old 2-Dec-2017, 1:12 AM   #45
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,446
Quote:
Originally Posted by blackstone View Post
My mini experiment with the motorized cheapy.
It's standing about 6'

Manually adjusting without the rotor I got RF 51, RF 38, RF 43 and RF 25 as well as 32? Virtual 6 from Johnstown
Those weren't very fine adjustments that I could make with the rotor.

Not sure what this is telling me.
Your Polaroid antenna has a built-in preamp. It is telling you that your Channel Master antenna needs a preamp up near the antenna.



The photo of the Polaroid antenna shows the front director folded forward, which is odd. And the reflector at the rear is unusual; I can't tell what it is made out of.

The similar QFX antenna has the front director folded back like the rest of the directors.



Quote:
I would need to know how to connect all these to my amp that only has 1 in and 4 out.
Would a 4 way splitter work or is there a 3 way or 4 way combiner?
Combining antennas with a splitter in reverse doesn't always work. You just have to try it.
Attached Images
File Type: jpg Polaroid AMA-1850P.jpg (49.2 KB, 337 views)
File Type: jpg QFX Ant-105.jpg (55.9 KB, 321 views)
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 2-Dec-2017 at 1:52 AM.
rabbit73 is offline   Reply With Quote