View Single Post
Old 11-Jun-2015, 10:50 PM   #8
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,747
Quote:
you mean i can use this close to the antenna instead close to the OTA receiver inside the house?
Yes, you can use the Commscope SVPI Power Inserter to send the power up to the amp by the antenna on the same coax for the signal that comes down to the power inserter and TV. The PCT power inserter would probably work OK.

Quote:
can i take the 12v power supply up to this distribution amp up to the antenna?
No, don't do that. It should stay inside near the TV and power inserter. See Attachments.

http://www.commscope.com/Docs/Amplif...llation_II.pdf

http://www.commscope.com/catalog/bro...id=45299&tab=3
Attached Images
File Type: jpg CommscopeSVA15PRSMsnip1 (2).jpg (77.2 KB, 882 views)
File Type: jpg CommscopeSVA15PRSMsnip2 (2).jpg (149.5 KB, 1040 views)
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 11-Jun-2015 at 11:28 PM.
rabbit73 is offline   Reply With Quote