Quote:
SO are you saying that if I kept the UHF elements the same orientation but stacked vertically I would end up with the same gain but keep the 70 degree HPBW? I think that would suit me based on my report!
|
Yes, more or less the same.
Quote:
Looking at the installation manual I think I can stack the loop elements and have the combiner bar connections on the loops facing each other and maybe this would still allow the combiner bars fit right up?
|
No. You cannot do it with the C4 combiner without really messing up the engineering of the phasing bars.
You'd either have to start with two C2 antennas and make a combiner (out of coax cables and a two port splitter, for example) or, if you have a C4, use standard baluns (matching transformers) to match to the same homemade combiner.