Thread: signal overload
View Single Post
Old 16-Aug-2014, 4:56 AM   #4
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
Have you tried removing the CM-7777 and it's power supply? The CM-7777 is for applications were no strong signals are present. If you need a preamplifier to drive a long run of coax or to overcome the losses incurred while splitting the signal, preamplifiers such as the RCA TVPRAMP1R or distribution amplifiers like the CM-3410 are better suited to the stronger signal levels shown in your report.

It sounds like this is a continuation of your earlier thread, http://forum.tvfool.com/showthread.php?t=14300
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')

Last edited by GroundUrMast; 16-Aug-2014 at 5:01 AM.
GroundUrMast is offline   Reply With Quote