View Single Post
Old 30-Jan-2011, 5:04 PM   #2
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
No, you will not loose signal by grounding the shield of the coax. The grounding block should not directly connect the signal carrying center conductor of the coax to ground. Unless the mast anchor rod is bonded to the rest of the electrical service ground system I would not consider it to be a 'ground' rod.

http://forum.tvfool.com/showthread.php?t=901
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')

Last edited by GroundUrMast; 30-Jan-2011 at 5:10 PM.
GroundUrMast is offline   Reply With Quote