View Single Post
Old 21-Mar-2019, 3:41 PM   #7
ADTech
Antennas Direct Tech Supp
 
Join Date: Jan 2010
Posts: 2,921
See post #2, I described where I drill them. A hole in each of the corners of the bottom of the housing that are closest to the F-connector. Do not drill in the corners directly under the driven element.



You can do this "in the air", if you choose, but you might get wet!



If you need a photo, let me know and I'll post one up here.
__________________
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at https://www.antennasdirect.com/customer-service.html

Sorry, I'm not a mod and cannot assist with your site registration.
ADTech is offline   Reply With Quote