As always , trees and tree leaves do a good job of , reflecting , reducing , blocking , Digital Broadcast Tv Reception and so do buildings and other obstructions including your own roof and house.
It is best to install the CS2 with the VHF metal reception rods kit at a location that has the least amount to no amount of obstructions of any type or kind in the directions of reception including your own roof and house.
Install the antenna -->UP HIGH<--.
Install the antenna so the antenna has the best possible view to the , north west , west , south west , south , south east.
Install the antenna -->UP HIGH<--.
Remove the Reflector Screen.
The reflector screen is not the UHF loops.
The reflector screen is not the VHF metal reception rods.
The reflector screen is the screen , remove the reflector screen.
With the reflector screen removed the CS2 with the VHF metal reception rods will receive 2 directions.
At the front and back of the antenna.
With the reflector screen removed aim the front or back of the antenna at about 300 degree magnetic compass direction.
Install the antenna -->UP HIGH<--.
Here is how to aim antennas ,
http://www.kyes.com/antenna/pointing/pointing.html.
Rescan for the Digital Broadcast Tv Channels.
Digital Broadcast Tv tuners can develop - Digital Glitches - that are not cleared out with simple channel scans.
Do a Double Rescan.
http://www.dtv.gov/rescan.html.
___________________________
Is
http://en.wikipedia.org/wiki/KCWX being received??
___________________________
How many Tv's are/will be connected??
___________________________