View Single Post
Old 3-May-2019, 11:35 PM   #2
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,544
Quote:
Originally Posted by kanjigirl View Post
We have a Clearstream 4 Ultra Long Range, installed I think in 2017.

Two days ago we lost 7.1 (ABC) which we've never had a problem with, since 2016. Rescanned several times since then and it's not coming in.

I just found this: https://www.thedenverchannel.com/new...tv-on-april-13

But we've had it with no interruption for years. Now it's gone and won't come back. We just ran a scan, usually we have about 60 channels but right now it's down to 40.
Hello, kanjigirl. I'm a little puzzled. They want you to rescan, but the references I found say KMGH Denver7 is staying on the same RF channel.
https://www.rabbitears.info/market.p...&callsign=KMGH

https://www.rabbitears.info/repackch...=&lss=&status=

This is an image of your report:



Here is a report from rabbitears.info that shows two ABC transmitters that will display 7.1 for ABC on your TV, KMGH and possibly KZFC-LP:



KMGH is on VHF-High real channel 7. Your antenna only has a simple dipole for VHF-High that doesn't have much gain.

KZFC has been an analog channel on 26:
https://www.rabbitears.info/market.p...llsign=KZFC-LP

but they they have a construction permit for a digital transmitter on 26:

https://www.rabbitears.info/tvq.php?...ms&facid=67530

Maybe forum member Tower Guy can figure it out, he is a retired TV station engineer.
Attached Images
File Type: jpg kanjigirlTVFreport5-3-2019.JPG (116.4 KB, 575 views)
File Type: jpg kanjigirlTVFreportRE5-3-2019.jpg (238.3 KB, 589 views)
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 3-May-2019 at 11:46 PM.
rabbit73 is offline   Reply With Quote