View Single Post
Old 13-Mar-2014, 6:34 PM   #3
teleview
Guest
 
Posts: n/a
+=>
-----
Here some and not all build your own antenna web sites.

http://www.wtfda.org/mem/rhombictvants.pdf.

http://www.wtfda.org/mem/rhombic.pdf.

http://www.mapability.com/ei8ic/rhombic.php.

http://www.ccdxc.org/ant_calc.htm.

--------------------------------------------------------

http://www.antennacraft.net.

Has the already built , Y5-2-6 , VHF channels low band 2 thru 6 antenna.

------

And it looks like , http://summitsource.com.

Has the , Winegard YA6260 , VHF channels low band 2 thru 6 antenna.

-----------------------------

Antennas of the 3 Tv channel bands.

VHF low band channels 2 thru 6.

VHF high band channels 7 thru 13.

UHF band channels 14 thru 51.

can be connected with separator / joiners.

HLSJ = VHF high band / low band , separator / joiner.

UVSJ = UHF band / VHF high and low band , separator / joiner.

----------------------------

Reversed splitters;

Basic splitters have direct wire connections on the inside the splitter , this allows signal strength bleed off from one antenna to another antenna.

To limit signal strength bleed off use.

Use capacitor coupled splitter.

Or use micro strip line coupled splitter.

-------------------------------------------------------------

Antenna selection can be done with a A/B switch and combinations of A/B switches.

http://www.mcmelectronics.com.

Model , 32-4425

---------------------------

Or can use separate tuners connected to the separate antennas and to the Tv.

http://www.epvision.com

Last edited by teleview; 13-Mar-2014 at 8:53 PM. Reason: Clarify information and typos.
  Reply With Quote