View Single Post
Old 14-Mar-2017, 1:57 PM   #4
rabbit73
Retired A/V Tech
 
Join Date: Aug 2012
Location: S.E. VA
Posts: 2,747
Quote:
The switch is "not" on the same circuit as the TV's power and is "not" on the same circuit as the signal booster's power.....The coax is run separate from all romex in the attic.
Interference can be radiated through the air or conducted through the power wiring, or both.

Quote:
And, every lite in the is LED.
Every lite in the WHAT is LED?

If you have more than one LED lite, then unscrewing only one might not stop the interference.

Other people who have had this problem have had to try another brand of LED lite to solve the problem.

case history:

Having trouble receiving VHF signals.
http://forum.tvfool.com/showthread.php?t=16058

It was the dimmer AND the LED lights.
__________________
If you can not measure it, you can not improve it.
Lord Kelvin, 1883
http://www.megalithia.com/elect/aeri...ttpoorman.html

Last edited by rabbit73; 14-Mar-2017 at 2:10 PM.
rabbit73 is offline   Reply With Quote