View Single Post
Old 21-Aug-2014, 7:05 AM   #21
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
You're on the right track. A corrosion resistant grounding clamp sized to match your mast, some #10 AWG copper and an appropriate clamp to make the connection at the electrical service takes care of the mast ground. But you will also want to be sure to ground the coax shield... See http://forum.tvfool.com/showthread.php?t=901, post #20
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')
GroundUrMast is offline   Reply With Quote