I'm not aware of an 'off the shelf' retail solution... Hopefully someone else does. I think you'll need to have some DIY skills with hardware and software. Doing a quick search online, I came up with this;
https://www.jfwindustries.com/produc...oaxial-switch/
I would expect an Arduino with Ethernet or Raspberry Pi could be used to interface via a web devise. I would investigate the Arduino first because it will directly support TTL (0 to 5V) signal levels whereas the RPi uses 3.3V and would need a level converter in-between it and the RF switch.
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)
(Please direct account activation inquiries to 'admin')
Last edited by GroundUrMast; 9-Jan-2020 at 5:32 PM.
Reason: added comment
|