View Single Post
Old 12-Oct-2010, 4:07 AM   #22
cardinalfanrc
Junior Member
 
Join Date: Sep 2010
Posts: 15
Awww crap. I think I'm making things worse. So, with moving the antenna four feet to the other side of the chimney, channel 7 now has 89-93 signal strength (up from 60) and I haven't seen any more pixelation. Unfortunately, I now have pixelation on channels 2, 5 and 9. Channel 2, I can understand since the signal strength has dropped from 90 to 55-60 now, but channels 5 and 9 have signal strength of approximately 90 and are getting frequent pixelation. I'm still not sure whether I have a signal problem or interference problem. Interestingly, there was a bit of pixelation this afternoon (channels 2,5,9) but I haven't really seen any yet tonight. I'm really confused as to why I can't get a reasonable signal based on my TV fool report.
My next step is to try putting the antenna at the peak of my roof (not the chimney) to see if this makes any difference. Any other suggestions?
cardinalfanrc is offline   Reply With Quote