View Single Post
Old 11-Dec-2019, 9:42 PM   #5
GroundUrMast
Moderator
 
GroundUrMast's Avatar
 
Join Date: Oct 2010
Location: Greater Seattle Area
Posts: 4,773
A three director Yagi for CH-6

Here is a design generated using software by VK5DJ.

https://forum.tvfool.com/showthread.php?t=1106

https://forum.tvfool.com/attachment....1&d=1576104088

I've built a few antennas based on this software and found them satisfactory. I have not built this particular design though.

You can use just the dipole alone or omit one or more directors if you wish. The balun design is optional, you can substitute a store bought 300/75 ohm balun.

Though the measurements are metric, I chose values that are close to imperial. The boom works out to about 8 feet of 1 inch square tube and the elements can be 3/8" to 1/2" diameter. (1 inch = 25.4 mm)
Attached Files
File Type: pdf 3DIRYagiCH6.pdf (140.3 KB, 188 views)
__________________
If the well is dry and you don't see rain on the horizon, you'll need to dig the hole deeper. (If the antenna can't get the job done, an amp won't fix it.)

(Please direct account activation inquiries to 'admin')

Last edited by GroundUrMast; 11-Dec-2019 at 9:52 PM. Reason: added comments
GroundUrMast is offline   Reply With Quote