View Single Post
Old 17-Oct-2012, 6:53 AM   #2
teleview
Guest
 
Posts: n/a
A Simple reception situation.

For the Chicago Digital Tv stations/channels.

Above the roof install a Winegard HD7084P antenna with a Winegard AP8700 preamp , aimed at about 148 dgree magnetic compass direction.

Here is how to aim antennas , http://www.kyes.com/antenna/pointing/pointing.html.

For 1 Tv connection use no splitter.

For 2 Tv's connected use a , HFS-2D , 2 way splitter.

For 3 Tv's connected use a , HFS-3D , 3 way splitter.

For 4 Tv's connected use a , HFS-4D , 4 way splitter.

Buy the HFS splitters at , http://www.hollandelectronics.com , or , http://www.solidsignal.com.

Here are some strong and sturdy antenna mounts , http://www.ronard.com/909911.html , http://www.ronard.com/34424560.html , http://www.ronard.com/ychim.html , http://www.ronard.com.

Here are some places to buy antennas and etc. , http://www.solidsignal.com , http://www.amazon.com , http://www.winegarddirect.com.

As always , trees and tree leaves do a real fine job of reducing or blocking Tv reception and so do buildings and other obstructions.

It is best to install the Tv antenna at a location that has the least amount to no amount of obstructions of any type or kind in the directions of reception.

The Tv/s Must Channel Scan for the Broadcast Tv channels , sometimes named the 'Air Channels' or 'Antenna Channels' in the Tv setup menu because the Tv transmissions travel through the air from the transmitting antenna to the receiving antenna.

DO NOT channel scan for cable tv channels.
  Reply With Quote