View Single Post
Old 28-Jan-2014, 3:31 PM   #17
ADTech
Antennas Direct Tech Supp
 
Join Date: Jan 2010
Posts: 2,942
Try a UHF Yagi (42XG, 43Xg or 91X) aimed directly at Springfield and see if you can receive KBRK or at KWBM. Be prepared to try multiple locations and/or heights for the antenna. If sucessful, have the folks at www.tinlee.com make you a custom combiner for channel 49 (for KRBK) or channel 31 (for KWBM). Ask for a model AC-7 for the needed channel.

I would use the pre-amp only on the UHF Yagi, the signals from the C2V should not need a pre-amplifier. Install the AC7 so as to combine the amplified KRBK/KWBM signal with the non-amplifed signals from the C2V, then distribute the signals.

That Skywalker amp is a terrible excuse for an amp as it is very noisy. If you actually need a single-output distribution amplifier (you may not), then a CM-3410 or the PCT equivalent works well.
__________________
Antennas Direct Tech Support

For support and recommendations regarding our products, please contact us directly at https://www.antennasdirect.com/customer-service.html

Sorry, I'm not a mod and cannot assist with your site registration.
ADTech is offline   Reply With Quote