TV Fool

TV Fool (http://forum.tvfool.com/index.php)
-   Antennas (http://forum.tvfool.com/forumdisplay.php?f=10)
-   -   Channel 2 signal (http://forum.tvfool.com/showthread.php?t=15538)

user name 6-May-2015 5:11 PM

Channel 2 signal
 
Does only the longest elements on a VHF antenna pick up channel 2?

rabbit73 6-May-2015 7:34 PM

Yes, because CH 2 is the lowest frequency TV channel, 54 to 60 MHz.
http://en.wikipedia.org/wiki/North_A...on_frequencies

The elements would be about 99 inches long across the width of the antenna.

Where are you located?

What does your tvfool report look like? You can do it here:
http://www.tvfool.com/index.php?opti...pper&Itemid=29

There are two types of VHF antennas. The largest VHF antennas cover VHF-low (2-6) and VHF-high channels (7-13). Channels 2-6 aren't used much anymore for digital TV. The more common and smaller VHF antenna covers 7-13.


All times are GMT. The time now is 1:58 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright © TV Fool, LLC