How to connect HDB8X to 2 maybe 3 TV's
The two cables from the HDB8X antenna goes into a combiner with one output. From there I need to feed one tv in one side of the house and 1 (maybe more later) in the other side of the house.
How is it best to do that? I was thinking about adding a splitter after the antennas combiner, but that sounds kind of weird. First combining 2 and then splitting in 2. Is that the way to go? |
Yes, that is the correct generally procedure.
|
Thanks!
One more question then.. What is the difference between these type of splitters: https://www.amazon.com/uxcell-Female...dp/B00AFX393W/ and this kind https://www.amazon.com/CHANNEL-2532-.../dp/B00006JPE1 |
The first is a simple tee- it's just plain, straight wire between the three ports.
The second is a proper transformer-type splitter that keeps the impedance of all three ports matched. The tee does not. |
All times are GMT. The time now is 5:59 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © TV Fool, LLC