View Full Version : vent pipe mount
drhoeh
19-Jul-2015, 5:56 PM
I have an older house built in the 1964 with cast iron vent pipes.  I want to avoid putting holes in the roof and I was thinking of putting my ant751 antenna on a 10ft mast pole off the vent pipe.  Is it safe to do that or could I run into trouble putting to much on the vent pipe. By the way it will be grounded. 
Thanks,
Dan
rabbit73
19-Jul-2015, 7:19 PM
A 5 ft mast would put less stress on the vent pipe. If the roofing compound at the base of the pipe has dried out, add some more.
https://www.google.com/?gws_rd=ssl#q=how+to+waterproof+roof+vent+pipe
drhoeh
19-Jul-2015, 7:28 PM
I did replace the flashing around the vent pipe 2 years ago and replace the shingles around it.  The old flashing was bad and leaking around the roof.  I also replaced some of the wood around the flashing as well.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.