Best Pre-amp For This Setup

[chambers]

I am wondering if a pre-amp will help my situation, and if so, what the best one is for my setup.

The problem I'm trying to solve - there is a channel or two that will occasionally get pixelated and “stutter.” It isn't a big deal, but annoying enought that I want to eliminate it permanently. Will a pre-amp help?


My information:

Channel Master CM 4221A 4-Bay Bowtie Antenna, mounted in the rafters in my garage
I am 28 miles from the towers, all the local channels use the same tower farm
The channels I want are in the “green zone” for signal strength, based on the TVFool map tool
I am at the bottom of a hill, with the towers over the hill
I have a 50 ft run of quad shield coax from the antenna to the 3-way splitter
The splitter then feeds 3 tuners

[ADTech]

Post the TVFool link and identify the specific stations that give problems.

Is the signal path up the hill clear or are there obstructions such as trees or buildings?

[teleview]

Is this a , house , townhome , condo , apartment , mobile home , motor home , or etc.??

For help that is more then general guess ti mations.

Please provide a tvfool radar map and channel list report.

Use the Exact reception address to make the report.

Make the antenna height of the report , 25 feet above ground.

25 feet antenna height above ground is a reference antenna height that provides a good idea of what is receivable.

How many floors to the building??

What directions do , windows , patios , balconies , face??

Any big trees close to the building and what directions??