mtsinner
12-Oct-2013, 4:14 PM
First off great forum....... hadn't had to post yet and got pretty far in my quest to cut the cord from reading here and a little help from a friend.
my report..... http://www.tvfool.com/?option=com_wrapper&Itemid=29&q=id%3d46aeca58b147d5
I get every channel up to and including channel 19 on the report. All the transmitters for the channels I care about are located at 155* except one. Channel 34 is at 23*. For DVR reasons is it possible to have 2 UHF antennas pointing at the each site for a complete channel lineup without using a rotor ? If so how is the wiring done properly ?
My current setup is a Winegard 8800 and a Channel Master 7778 pre amp.
Thanks for any help.
my report..... http://www.tvfool.com/?option=com_wrapper&Itemid=29&q=id%3d46aeca58b147d5
I get every channel up to and including channel 19 on the report. All the transmitters for the channels I care about are located at 155* except one. Channel 34 is at 23*. For DVR reasons is it possible to have 2 UHF antennas pointing at the each site for a complete channel lineup without using a rotor ? If so how is the wiring done properly ?
My current setup is a Winegard 8800 and a Channel Master 7778 pre amp.
Thanks for any help.